2/20/2023 0 Comments Pedal board split signal pathOn the other one you've got the HX preamp and a cab, isn't there something missing (a power amp) ? In this case, you've got a path that have the preamp (HX) - The power amp from the Suhr and the the Suhr's cab. Is what I'm proposing to do a bit unusual then? I assumed that having the signal going to the backline and to FOH would have been fairly normal? I usually plug into the front of my amp but I guess I could plug into the FX loop and bypass the preamp that way? It's a nice amp (Suhr Badger 35), but as you say, I have no idea how much colouring of the sound it'll do. I had a thought though - if I'm sending the signal to the real amp, AND to the FOH, should I set the Stomp to Line level or instrument level? The signal going to the mixer will need Line level I guess, but my amp will want instrument level? ![]() Thanks Kilrahi, that's a few things I'll definitely try when it arrives today! Second path goes into amp effects return and lets the real cab fill in that final gap. Split into two signal paths at the very end - one going FOH that includes a cab or IR cab block as its final block. Create a signal path that includes any pre amp effects, amp, and then post amp effects. Bypass the real amps pre-amp (letting the Stomp do this stuff). Does your amp require that you plug in straight to the guitar input? Because if so this might also solve your problems, as you could: ![]() If you're not fond of it - you won't be fond of it with the Stomp.Ģ. Test a delay pedal now in front of the amp with the amp set clean. There are a few things you can try now though to find out:ġ. The Stomp takes the Strymon fine, but the hard part remains knowing just how your amp will color things.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |